Quality directly from the manufacturer
Long-term stable temperature probes over years
Advice directly from experts
 

Contact probe bar magnet with glass fibre cable

€34.87 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 4 Workdays to GER (AT, NL, BE +1 workdays)

Repeated order: check settings carefully and change if necessary.
1.Configuration
A - Measuring element

Bitte prüfen Sie, welches Messelement (Thermistortyp oder Pt) für Ihre Anwendung der Passende ist. Wichtige Informationen zum Messelement entnehmen Sie bitte den Kennlinien und Datenblättern. Diese finden Sie in der Langbeschreibung oder in unserem Download-Bereich.

keine Auswahl
(A011) Pt100 Class A
(A012) Pt100 Class B
(A031) Pt1000 Class A
(A032) Pt1000 Class B
B - Connection Type

Bei Zwei-Leiter-Schaltungen addiert sich der Eigenwiderstand der Anschlussleitung zum Widerstandswert des Messwiderstands (Thermistor oder Pt) und verfälscht somit das Messergebnis. Ist der Widerstandswert des Messwiderstands groß gegenüber dem Eigenwiderstand der Anschlussleitung, so kann dieser Eigenwiderstand vernachlässigt werden. Bei Messwiderständen mit geringerem Widerstandswert (z.B. PT100), kann der Leitungseigenwiderstand die Messgenauigkeit jedoch signifikant verringern. Aus diesem Grund empfehlen wir die Zwei-Leiter-Technik in Verbindung mit kleinohmigen Messwiderständen nur dann, wenn Sie vergleichsweise kurze Anschlussleitungen, also kleinohmige Anschlussleitungen, verwenden können.

Für Applikationen, die eine sehr genaue Temperaturmessung erfordern, empfehlen wir Ihnen eine Drei- oder sogar Vier-Leiterschaltung zu verwenden.

Bei der Dreileiter-Schaltung wird der Leitungswiderstand jeder der drei angeschlossenen Leitungen mit Hilfe der dritten angeschlossenen Leitung ermittelt (alle Anschlussdrähte müssen exakt gleich lang sein) und anschließend vom gemessenen Gesamtwiderstand (Messwiderstand+Leitungswiderstand) abgezogen werden, so dass effektiv nur der Widerstandswert des Messwiderstands für die Temperaturbestimmung verwendet wird. Diese Subtraktion kann beispielsweise in der Messelelektronik automatisch durchgeführt werden.

Die sicherste und genaueste Messung erreichen Sie mit Hilfe einer Vierleiter-Schaltung. Hier wird auf jeder Seite des Messwiderstands eine zusätzliche Leitung angeschlossen. Zwei Leitungen dienen der Spannungsversorgung, die zwei anderen werden verwendet, um den Leitungswiderstand (ggf. auch asymmetrisch, also auch bei unterschiedlich langen Anschlussdrähtchen) zu ermitteln und vom Messwiderstandswert abzuziehen. Diese Subtraktion kann beispielsweise in der Messelelektronik automatisch durchgeführt werden.

(B2) 2-Wire
(B3) 3-Wire
(B4) 4-Wire
E - Material connection cable

Bitte stellen Sie sicher, dass die technischen Daten der Anschlussleitung, insbesondere hinsichtlich Temperatur und IP-Schutzklasse, zu Ihrer Applikation passen. Detailierte Informationen finden Sie in unseren Datenblättern.
Temperaturbereiche unserer Leitungen:
Glasseide: -50 °C bis +400 °C

(E3300) GLS/VA (2 x 0,22 mm²)
(E3301) GLS/VA (3 x 0,22 mm²)
(E3302) GLS/VA (4 x 0,22 mm²)
F - Length connection cable

Bei sehr langen Anschlussleitungen beachten Sie bitte den Einfluss des Eigenwiderstandswerts der Leitung auf die Messgenauigkeit. Für Fühler mit Pt-Messelementen empfehlen wir in diesem Fall den Einsatz einer Drei- oder Vierleiterschaltung.

(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
(F010) 1 m
(F020) 2 m
(F030) 3 m
(F040) 4 m
(F050) 5 m
(F100) 10 m
(F150) 15 m
(F200) 20 m
G - Connector
(G01) Insulated end ferrules
(G01) Insulated end ferrules
(G01) Insulated end ferrules
H - Bend protection
(H0) Without (Standard)
Image Changer
2.How many probes do you need?
Price calculation
Basic price
€34.87
A - Measuring element:  
B - Connection Type:  
E - Material connection cable:  
F - Length connection cable:  
G - Connector:  
H - Bend protection:  
Quantity:  
Configuration is incomplete - please check it!
  • 802081-2011
Our Payments
MasterCardPayPalInvoiceVISAPrepayment

Advantages

  • Advice directly from experts
  • Quality directly from the manufacturer
  • Long-term stable temperature probes over years
  • B2B customers welcome: All information here
Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de
Surface probes are used for temperature measurements on smooth surfaces. The probe sits securely... more
Product information "Contact probe bar magnet with glass fibre cable"

Surface probes are used for temperature measurements on smooth surfaces. The probe sits securely at the measuring point due to the particularly strong holding magnet without having to be permanently installed. Glass fiber cables are shielded and measure temperature up to +400 °C. They are crimped and also have a poorer seal than other cables due to the insulation material used.

Here you can find our downloads for the Contact probe bar magnet with glass fibre cable

pdf-download Data sheet Contact probe bar magnet with glass fibre cable
pdf-download Instruction manual Contact probe bar magnet with glass fibre cable
pdf-download Operating instruction Contact probe bar magnet with glass fibre cable
pdf-download Declaration of Conformity Contact probe bar magnet with glass fibre cable
 

Surface probe - General Information

Measuring range -50 °C to +350 °C depending on the connecting cable and contact body
Perm. °C range cable -50 °C to +400 °C
Accuracy depending on sensor type
Response time t63 / t99: information is available on request
Pull-out force ≥ 30 N
                                       

Surface probe - Supply and output

Max. measurement current max. 1 mA
Supply voltage approx. 5 V depending on measurement current
Measurement signal passive (resistance value)
 

Surface probe - Ambient conditions

Protection class IP20 according DIN 60529 (depending on cable)
Humidity and moisture condensation resistance according to application-specific qualification
 

Surface probe - Certificates and Standards

Standards DIN EN 61326-1:2013 | DIN EN IEC 63000:2019-05
Directive RoHS 2011/65/EU | 2014/30/EU
Certificates Certificate of suitability (on request)
 

Surface probe - Technical Drawing

A - Measuring element
B - Connection type
E - Material connection cable
F - Length connection cable
H - Bend protection
G - Connector
All dimensions in mm
 

Surface probe - Measuring element

Measuring element Perm. range °C Accuracy / Tolerance resistance
Pt100 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt100 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
Pt1000 -50 °C to +400 °C Class B dT = ±(0,30 °C + 0,005|t|)1}
Pt1000 -50 °C to +300 °C Class A dT = ±(0,15 °C + 0,002|t|)1}
1} according to IEC 751 / EN 60751 | Please note that the measuring range depends on the measuring element and the connecting cable.
 

Surface probe - Possible connections

Measuring element 2W 3W 4W
Pt Checkmark Checkmark Checkmark
 

Surface probe - Contact body

Contact geometry Square
Material Aluminium
Length (mm) 30
Width (mm) 8
Height (mm) 8
Perm. °C-Range -50 °C to +350 °C
Magnet 3 x Sm2Co17 magnets to 350 °C
Holding magnet strength Counter material adhesion ≥45 N
 

Surface probe - Material connection cable

Color: steel, Perm. range °C: -50 to +400
Material (Outside / Inside) Ø Outside (mm) Cross section (mm²)2} Color strand Ω / m1}
Varnish 3,2 ± 0,2 2 x 0,22 rd, wt 0,09
Varnish 3,2 ± 0,2 3 x 0,22 rd, wt, rd 0,09
Varnish 3,4 ± 0,2 4 x 0,22 rd, wt, rd, wt 0,09
Length (m) 1, 2, 3, 4, 5, 10, 15, 20
Insulation resistance: ≥ 100 MOhm at min. 100 VDC | Cable available as accessory | 1} per single strand | 2} Tolerance ± 0,03 mm²
 

Surface probe - Connector

Insulated end ferrules (50 mm)
 

Surface probe - Delivery

Assembly instructions via magnet
Delivery and Packaging Probe, seperatly packaged in PE bag
Matching accessories Heat-conducting paste
 

Surface probe - Important assembly advices

The contact probe is attached directly to the measuring point with the holding magnet. The surface should be clean, even and free of residues. If necessary, you can use thermal paste for better thermal coupling.

 

Qualification measurement series to ensure the function of our temperature probes over their service life

Qualifizierungsmessreihe Robust even with temperature changes Temperature probes are exposed to harsh environmental conditions, such as changing temperatures and humidity, and should still work reliably in the field for 15 years or more. Checkmark
Qualifizierungsmessreihe Resistant to heat and humidity Extremely varying ambient conditions cause immense stress for the temperature probe and the design must be suitably robust and qualified.        
Qualifizierungsmessreihe Long-term stable in any weather Continuous exposure to sunlight, snow, fog, cold and ice shall not impair the function of the temperature probe and compliance with the specification.        
Qualifizierungsmessreihe Robust even under high vibration load Depending on the application, compressors and fans generate strong vibrations which are transmitted to components and cables. Therefore the used temperature probes have to be vibration resistant (20g). Checkmark
Qualifizierungsmessreihe Reliable in practice: high pull-out force The robust design ensures the necessary cable pull-out resistance, even under vibration and higher temperatures. Checkmark
Qualifizierungsmessreihe Efficient through short response time Depending on the application, short response times may be necessary to ensure efficient control of the system. Our sensor design is optimised for this requirement and we prove response times.        
Qualifizierungsmessreihe Corrosion-resistant even in salt spray Temperature probes are also used in coastal regions. For this reason, the temperature probes must also be able to withstand salty air for a lifespan of 15 years.        
Checkmark

Applicable for this probe type

Properties
Measuring element: Pt100 Class A, Pt100 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range: -50 °C to +350 °C
Connection type: 2-Wire, 3-Wire, 4-Wire
Material cable: Glass fibre
industry: Automotive, Machinery and apparatus engineering, Steel and iron industry
Related links to "Contact probe bar magnet with glass fibre cable"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "Contact probe bar magnet with glass fibre cable"
Write an evaluation
Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.
I have taken note of the Privacy Policy.

The fields marked with * are required.

Kreuzbandfühler mit Einschraubgewinde Vorderansicht Cross-band probe with Screw-in thread
€153.63 *
Order number: 802911-1211
Add to shopping cart
Kreuzbandfühler mit Ringmagnet Vorderansicht Cross-band probe with ring magnet
€166.12 *
Order number: 802912-1211
Add to shopping cart
Kreuzbandfühler mit Kontermutter Vorderansicht Cross-band probe with counter nut
€186.24 *
Order number: 802913-1211
Add to shopping cart
Anlegefühler Haftmagnet mit Silikon-Leitung Vorderansicht Contact probe bar magnet with silicone cable
€28.32 *
Order number: 802061-2011
Add to shopping cart
Anlegefühler Haftmagnet mit PFA-Leitung Vorderansicht Contact probe bar magnet with PFA cable
€33.68 *
Order number: 802071-2011
Add to shopping cart
Anlegefühler mit Glasseide-Leitung Vorderansicht Contact probe with glass fibre cable
€30.11 *
Order number: 802083-1011
Add to shopping cart
Anlegefühler Hufeisenmagnet mit Glasseide-Leitung Vorderansicht Contact probe horseshoe magnet with glass fibre...
€68.19 *
Order number: 802081-1011
Add to shopping cart
Kreuzbandfühler mit Sondenrohr Vorderansicht Cross-band probe with probe shaft
€168.98 *
Order number: 802910-1211
Add to shopping cart