Screw-in probe with steel immersion sleeve

Einschraubfühler mit Edelstahl-Tauchhülse Vorderansicht

Einschraubfühler mit Edelstahl-Tauchhülse Technische Zeichnung

Preview: Einschraubfühler mit Edelstahl-Tauchhülse Vorderansicht

Preview: Einschraubfühler mit Edelstahl-Tauchhülse Technische Zeichnung

€44.98 *

Prices incl. VAT plus shipping costs of 4,95 € to GER (incl. VAT)

Delivery time 4 Workdays to GER (AT, NL, BE +1 workdays)

Repeated order: check settings carefully and change if necessary.

1.Configure and order now

A - Measuring element

B - Connection Type

C - Mounting length

2.How many articles do you need?

Quantity

Price calculation

Basic price

€44.98

A - Measuring element:
B - Connection Type:
C - Mounting length:
Quantity:

Order number: 803016-1011

Our Payments

Advantages

Advice directly from experts
Quality directly from the manufacturer
Long-term stable temperature probes over years
B2B customers welcome: All information here

Questions about the article?
Our employee will be happy to help you:
Julian Mäntele
Tel.: +49 (0)7653 96 59 771
E-Mail: jmaentele@testo-sensor.de

Our screw-in probe with stainless steel immersion sleeve is mounted via the G1/2 “ thread. With... more

Close menu

Product information "Screw-in probe with steel immersion sleeve"

Our screw-in probe with stainless steel immersion sleeve is mounted via the G1/2 “ thread. With the polyamide housing, the Screw-in probe is the perfect solution for measuring the temperature in pipes or containers.

Here you can find our downloads for the Screw-in probe with steel immersion sleeve

	Data sheet Screw-in probe with steel immersion sleeve
	Instruction manual Screw-in probe with steel immersion sleeve
	Operating instruction Screw-in probe with steel immersion sleeve
	Declaration of Conformity Screw-in probe with steel immersion sleeve

Screw-in probe with housing - General Information
Measuring range				-30 °C to +150 °C depending on the sensor Type
Perm. temperature range housing				-30 °C to +90 °C
Accuracy				depending on sensor Type

Screw-in probe with housing - Supply and output
Max. measurement current				max. 1 mA
Supply voltage				approx. 5 V depending on measurement current
Measurement signal				passive (resistance value)

Screw-in probe with housing - Ambient conditions
Protection class				IP65 according DIN 60529
Humidity and moisture condensation resistance				according to application-specific qualification

Screw-in probe with housing - Certificates and Standards
Standards				DIN EN 61326-1:2013 \| DIN EN IEC 63000:2019-05
Directive				RoHS 2011/65/EU \| 2014/30/EU

Screw-in probe with housing - Technical Drawing

					A - Measuring element
					B - Connection Type
					C - Mounting length
					All dimensions in mm

Screw-in probe with housing - Measuring element
Measuring element	Perm. range °C			Accuracy / Tolerance resistance
Pt100	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt100	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
Pt100	-50 °C to +200 °C			1/3 Class B dT = ±(1/3 · (0,30 °C + 0,005\|t\|))^1}
Pt100	±0 °C to +100 °C			1/10 Class B dT = ±(1/10 · (0,30 °C + 0,005\|t\|))^1}
Pt500	-70 °C to +500 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +400 °C			Class B dT = ±(0,30 °C + 0,005\|t\|)^1}
Pt1000	-50 °C to +300 °C			Class A dT = ±(0,15 °C + 0,002\|t\|)^1}
NTC 5 kOhm	-40 °C to +125 °C			R25 = 5 KOhm ±1 %
NTC 10 kOhm	-40 °C to +125 °C			R25 = 10 KOhm ±1 %
NTC 20 kOhm	-40 °C to +125 °C			R25 = 20 KOhm ±1 %
KTY 81-210	-50 °C to +150 °C			R25 = 2 KOhm ±1 %
KTY 81-110	-50 °C to +150 °C			R25 = 1 KOhm ±1 %
DS18B20	-55 °C to +125 °C			-10 °C to +85 °C: ±0,5 °C \| -30 °C to +100 °C: ±1 °C \| -55 °C to +125 °C: ±2 °C
LM235Z	-40 °C to +125 °C			typical ±1 °C
Ni1000	-60 °C to +150 °C			-60 °C to 0 °C: dT = ±(0,4 °C + 0,028 · T) \| 0 °C to +150 °C: dT = ±(0,4 °C + 0,007 · T)
^1} according to IEC 751 / EN 60751

Screw-in probe with housing - Possible connections
Measuring element	2W	3W	4W
NTC
KTY
LM235Z
DS18B20
NI
Pt

Screw-in probe with housing - Protection sleeve
Thread
Thread				G1/2 "
Material				Stainless steel 1.4571 \| 316TI
Diameter (mm)^1}				6
Mounting length (mm)^2}				50, 100, 150, 200, 250, 300, 400
^1} Tolerance ± 0,1 mm \| ^2} Tolerance ± 1%

Screw-in probe with housing - Immersion sleeve
Material				Stainless Steel
Diameter (mm)				9
Pressure				max. 40bar

Screw-in probe with housing - Housing
Material				Polyamide
Dimension (L/W/H) (mm)				64 x 58 x 35
Color				white similar RAL 9010
Cable entry				with strain relief
Clamping range (mm)				5 to 9
Electrical connection				Screw terminals max. 1,5 mm²

Screw-in probe with housing - Delivery
Assembly instructions				via immersion sleeve
Delivery and Packaging				Probe, seperatly packaged in PE bag
Matching accessories				Immersion sleeve, Heat-conducting paste, Compression fitting, Cable

Screw-in probe with housing - Important assembly advices
				Measuring errors can occur due to heat dissipation to the environment. To keep these as small as possible, we recommend immersing the protection sleeve of your temperature probe as deep as possible into the medium to be measured during installation. The optimum installation depth should be 10-15 times the Ø of the protection sleeve or, if an immersion sleeve is used, the Ø of the immersion sleeve. When installing in pipes whose Ø does not have a sufficiently deep installation depth, you should either install the probe at an angle or in a pipe elbow. Make sure that you have enough space so that the probe can be removed again. 1) Installation with sufficient installation depth 2) Installation at an angle with small pipe Ø 3) Not like this: Minimum installation depth not reached
				Installation by using an immersion sleeve (4): Please ensure that the Ø and length of the immersion sleeve are selected to suit the installation situation so that the minimum immersion depth can be achieved. Please also ensure that the process connection is correct. Because the probe is not inserted directly into the medium, but via the immersion sleeve, the response times are somewhat slower. The probe should be selected so that the protection sleeve touches the bottom of the immersion sleeve and the air cushion around the protection tube is as small as possible. The use of thermal conduction paste can improve the response times.
				Please lay the cable so that no water can penetrate the probe and with a spare loop (4). This allows you to extend the probe without disconnecting the electrical connection.

Properties

Measuring element:	DS18B20, KTY 81-110, KTY 81-210, LM235Z, Ni1000, NTC 5 kOhm, NTC 10 kOhm, NTC 20 kOhm, Pt100 1/3 Class B, Pt100 1/10 Class B, Pt100 Class A, Pt100 Class B, Pt500 Class B, Pt1000 Class A, Pt1000 Class B
Temperature range:	-30 °C to +150 °C
Connection type:	2-Wire, 3-Wire, 4-Wire
Process connection:	G1/2 "
industry:	Air conditioning and ventilation technology, Automotive, Building automation, Food industry, Heating technology, Machinery and apparatus engineering, Pharmaceutical industry, Plastics industry, Power generation, Refrigeration

Related links to "Screw-in probe with steel immersion sleeve"

Available downloads:

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Screw-in probe with steel immersion sleeve"

Write an evaluation

Each consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed. The verification is carried out by manual checking in the form of a comparison of the rating with the order history of the merchandise management system in order to make a previous product purchase a necessary condition for publication.